Pinned 128Mb CPS3 SIMMS!!!!!!

Darksoft · Sep 12th 2015, 12:56pm

Hello!

See below Gerber Files for SIMM ready to go into production.

Notice that I still got some units left!! If you want to order the moment is now. PM me for info.

Darksoft · Sep 25th 2015, 2:20pm

I decided to move this thread here as this is not a Project IDEA any more.....

See pics below. Notice the small DARKSOFT text on the right.

aje_fr · Sep 25th 2015, 5:43pm

It looks like a 4 layers PCB, isn't it ?

Darksoft · Sep 25th 2015, 7:16pm

Sharp eye you have! 4 layers it is.

chrisapple · Oct 1st 2015, 5:41am

I want 2 of 128mb

darkbrokenheartz · Oct 8th 2015, 5:22pm

I'm intrested in the 6 have an unpoulated CPS3 board. either I want to sell that or get 6 dimms to populate it.

Mitsurugi-w · Oct 8th 2015, 6:06pm

darkbrokenheartz wrote:

I'm intrested in the 6 have an unpoulated CPS3 board. either I want to sell that or get 6 dimms to populate it.

You could use four of these but you would still need to source two 64mb SIMMs to populate your pcb. The 128s do not work in slots 1 and 2.

htownscott · Oct 19th 2015, 2:25am

Id been keen a couple to put anyway for a rainy day

Darksoft · Oct 20th 2015, 12:47pm

Samples arrived. If they work well, I'll have the rest soldered....and shipped to you guys.

friedpotatoz · Oct 20th 2015, 8:47pm

Darksoft wrote:

Samples arrived. If they work well, I'll have the rest soldered....and shipped to you guys.

Awesome, I was just thinking about this, haven't been on for a while.

kazuo · Oct 26th 2015, 2:49am

This is fantastic! I've wanted a few spares for some time, and I passed on putting together a second CPS3 setup together since it was annoying to find spare SIMMs.

DS, can I just send payment to your PP? How many do you have left?

Mitsurugi-w · Oct 26th 2015, 3:04am

Right now he only has the first samples. There is a correction that needs to be made. Darksoft will keep you all posted I'm sure.

kingcar · Oct 26th 2015, 1:07pm

I'll take 4 since 2 still need to be 64mb

chinitosoccer · Nov 1st 2015, 3:43pm

I will need x3 if I want to run 3rd Strike on my New generation board, is that correct? my board currently its like this:

Slot1: 64 mbit
slot2: empty
slot3: 128 mbit
slot4: 128 mbit
slot5: 32 mbit
slot6: empty
slot7: empty

So I'll need to get x2 extra 128mb simms and replace the 32mb one for a 128mb or just install it on slot 7. is this possible?

Darksoft · Nov 1st 2015, 3:51pm

chinitosoccer wrote:

I will need x3 if I want to run 3rd Strike on my New generation board, is that correct? my board currently its like this:

Slot1: 64 mbit
slot2: empty
slot3: 128 mbit
slot4: 128 mbit
slot5: 32 mbit
slot6: empty
slot7: empty

So I'll need to get x2 extra 128mb simms and replace the 32mb one for a 128mb or just install it on slot 7. is this possible?

Check here:
junkerhq.net/xrgb/index.php/CPS-III

chinitosoccer · Nov 1st 2015, 4:02pm

yup, Iwill need x3, otherwise I will be missing 32mbits for 3rd Strike.

Darksoft · Nov 1st 2015, 4:35pm

chinitosoccer wrote:

yup, Iwill need x3, otherwise I will be missing 32mbits for 3rd Strike.

what about 64Mb SIMMS?

chinitosoccer · Nov 1st 2015, 5:02pm

well, are you also going to make 64mb's simms?

Mitsurugi-w · Nov 1st 2015, 5:54pm

You will remove the 32 and discard it (or save it for a different project). You only need to add two 128s. Then you will need to source a 64 from somewhere. Should have four 128s and two 64s. The 32 will not work with Third Strike.

You can't use a 128 to replace a 64. You must use the specific SIMM setup. Remember, this isn't ram. They are flash chip modules.

chinitosoccer · Nov 1st 2015, 6:12pm

Understood, I'll need a pair of 128's then look elsewhere for a 64mbit one, I will send you my NG suicided cart tomorrow for Bios+standard SH2 mod.

Pinned 128Mb CPS3 SIMMS!!!!!!

darkbrokenheartz wrote:

Darksoft wrote:

chinitosoccer wrote:

chinitosoccer wrote:

Share

Tags