What's new

freddiefiasco

Professional
Joined
Feb 20, 2016
Messages
480
Reaction score
84
Location
California, USA
I'm not sure if there's a specific place to ask for some identifying information on wiring harnesses. (not sure if this section is used for everyone to contribute: Power and Wiring Adapters)

I am trying to identify the following connectors to create a couple harnesses:

The 4pin looks to be a molex plug but it doesn't look common to me.
The 5 pin looks like a JST connector but I'm not exactly sure as it has that extra clip on top (left side in the pic) and does not have that JST lip that i'm used to seeing on boards like the SEGA JVS I/O.

Thanks!
 

Attachments

  • 24VPower RW.PNG
    24VPower RW.PNG
    255.7 KB · Views: 199
  • CARD RW Wires.PNG
    CARD RW Wires.PNG
    742.6 KB · Views: 207
  • SERIAL RW.PNG
    SERIAL RW.PNG
    334.1 KB · Views: 184
Ah, my bad. I don't think it's SM (or VH) then in that case. I think it will be something manufactured by JST though. If I was you I would take a look through the various JST series and see if you can ID them. Go [here] and look under the 'Wire to Board Crimp Style Connectors' and 'Wire to Wire connectors' categories. To narrow it down you can measure the pitch (pin spacing) of your connectors and then go from there.
 
Back
Top