What's new

FrizzleFried

Enthusiast
Joined
Jul 21, 2015
Messages
197
Reaction score
58
Location
Idaho, U.S.
So... after having to disassemble my B-Board to work on the microSD I thought to myself... "this sucks having to disassemble each time" ... and came up with a solution... one some may get pissy about... but what can I say...

I cut a hole about 1.5" wide and 2" long in the case right above the microSD card slot... now I can pull the card anytime I want without having to even remove the B Board...
 
Can I ask why you didn't just get a micro SD extender like a bunch of other people have? You can mount it in the pre existing hole for the counter, or I imagine you could probably even mount it in a vent slot if you were careful about it. That's what I'm doing once I finally button mine up
 
Can I ask why you didn't just get a micro SD extender like a bunch of other people have? You can mount it in the pre existing hole for the counter, or I imagine you could probably even mount it in a vent slot if you were careful about it. That's what I'm doing once I finally button mine up
Didn't think about it...

>doh!<

:D
 
Back
Top