Bars in graphics, and the cause for me

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Bars in graphics, and the cause for me

      So Ive had my multi for a while now, finally decided to update the ROMs. Pulled it apart, got the SD, updated, put it back together and got bars.

      I checked all the pins on the multi kit and everything was where it should be, deleted and formatted the SD card like a bajillion times then figured I should check the A/B board pins. That was the issue. So if you keep checking everything and everything looks right and the roms are good, stop and look at the A to B board pins, you may have bent them like I did

      bars on title screen:



      the culprit!



      no more graphical glitches
      Current Project: 1986 Comet Pinball play field swap