Here's mine, made using Jamma Nation X page as a guide:
Just got the HAS v4. This thing is just plain phenomenal.
Best place to buy a super gun? Need something for a test bench and time doesn't allow for a build right now. In the US if it matrers?
I guess you can use any gun. It does not really matter.
I used a very common one from a shop in Germany: arcadeforge.net/Supergun-MAK-S…-Strike-Stripped::90.html
Ordered a common one with +5V /12V supply up to 2A
My does work with all different pcbs and board so far (igs PGM, PGM2, Atomiswave, MVS, Asterix PCB, ...) without any issue.
There is no voltage regulator included - Voltage between 5.1 - 5.23V. Only focus I had was on 4-pin MOLEX connector that fits with the used supergun.
looking forward to see your project
Let me know if you need further details.
Thanks Loki, thats all i need for now.
I will let you know about my progress!!!
One Year ago I had the Idea of building a Supergun just for JVS Systems. Since there were always too many components lying around, I/O, extra PSU etc...
So I decided to put everything in a box and have a safer option to bring to events and use in my Gaming Location.
I always had concerns about bringing JVS setups to events since power sources we're always kinda open with risk of shock or shorting .
The box contains:
ATX breakout board
2x Undamned USB Decoders
1x Jamma Edge
2x USB Extensions
1x 4 Pin power outlet
1x Neutrik USB plunge
1x Test switch
The Supergun is only for 31khz use, I didn't want to add Scart output.
Link to the whole gallery
For the Case I just used some plywood I had and thin acryl boards.
The Backside I will redo because it is not done well. Maybe I'll add a Scartout then.