Home Arcade System - new supergun sets

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Home Arcade System - new supergun sets

      Home Arcade System V3.2



      Home Arcade System, HAS for short, is my newest supergun. The idea was to have a relatively small PCB-type supergun but packed with some useful features (button layout remapping, autofire, and hassle-free arcade power supply connection). The newest version is 3.2.

      Features:

      • JAMMA, JAMMA+ and CHAMMA compatible
      • DB15 controller ports (NeoGeo compatible, extended to support buttons 5 and 6)
      • Programmable button layout
      • Programmable rapid-fire (VSync synchronized, 6 different fire rates)
      • Buttons 1-6 on the JAMMA connector (buttons 4-6 can be disabled)
      • Buttons 4-6 on the “kick harness” connector
      • Internal memory to store the button layout and rapid-fire settings
      • RGB+CSync video output (75 Ohm impedance)
      • Video brightness regulation via one knob
      • CSync buffer
      • CSync regeneration (fixes the upper part of the screen in the Taito F3 connected via the XRGB Mini)
      • Selectable CSync level (~0.35Vp-p, 75 Ohm impedance or ~5Vp-p, TTL)
      • HSync and VSync outputs (~5Vp-p, TTL)
      • 8pin mini DIN connector for audio and video (XRGB Mini pinout)
      • 3.5mm jack connector for audio (it overrides the 8pin mini DIN)
      • Audio attenuation (works with all Cave PCBs; attenuation can be disabled)
      • Test and Service buttons
      • Voltmeter (selectable +5V/+12V)
      • 6pin power connector
      • Plexi glass case (4mm thick acrylic glass covers for top and bottom)
      • Modular build (the basic functionality can be expanded by using additional modules)

      Price guide:
      • HAS V3.2 supergun - 122 EUR [temporarily unavailable] (the set includes a HAS unit; a set of accessories - 2x laser cut 4mm acrylic covers (for top and bottom), a set of screws, and spacers (the "case" comes unassembled); a power supply cable - high quality 45cm long 18AWG cables; 6pin connector on one end, M3.5 fork terminals on the other end that is suitable for arcade power supplies).

      • Sega Saturn to JAMMA joypad converter - 32 EUR [temporarily unavailable]
        • lagless
        • 6 functional buttons + start and coin buttons
        • A built-in coin mechanism emulator.
        • Compatible with official Sega Saturn joypads and arcade sticks (HSS-0104, HSS-0136, HSS-0130). 3rd party controllers/adapters work with limited luck, meaning there are models that work, and some that don't work at all. Analog controllers (including the Sega one; HSS-0137) are not compatible.

      • CPS2 kick harness, 25cm long (colours may vary) - 8 EUR

      • CPS1 kick harness, 45cm long (colours may vary) - 8 EUR


      • 3P4P adapter PCB - allows to connect Player 3 and Player 4. The pinout of the 34 pin connector matches the IGS PGM pinout - 20 EUR [temporarily unavailable]


      • CPS2 Player 3 and Player 4 harness for the 3P4P adapter (colours may vary) - 16 EUR
      • Konami Player 3 and Player 4 harness for the 3P4P adapter (compatible with X-Men, TNMNT I & II, Sunset Riders, Simpsons, Bucky O'Hare, Dark Adventure, Metamorphic Force, G.I. Joe) (colours may vary) - 16 EUR


      • HD15 adapter PCB. With this adapter you can connect the HAS with the OSSC using a standard VGA cable (it helps with the Taito F3, which won't work with the OSSC when connected via the Scart). You can also use a VGA->BNC cable to connect it directly to PVM/BVM monitors. The adapter comes with a set of spacers - 12 EUR


      • 8pin mini DIN to HD15 adapter PCB. With this adapter you can connect the HAS with the OSSC using a standard VGA cable (it helps with the Taito F3, which won't work with the OSSC when connected via the Scart). You can also use a VGA->BNC cable to connect it directly to PVM/BVM monitors. This adapter requires an 8pin mini DIN to 8pin mini DIN cable (pins must connect straight through end to end - 10 EUR [gone as of 02/05/2018; ordered more, will be available in mid June]


      • PlayStation 2 RGB Scart cable adapter - 12 EUR [With this adapter you can use the PS2 RGB Scart cable. The adapter allows to select Sync on CSync or Luma, depending on the cable used. PS1 cable can be used as well, but it will require small modification on the HAS PCB (closing 3 jumpers). The adapter comes with a set of spacers]



      Sold:

      Display Spoiler

      • SCART to 2xRCA and 8pin mini DIN adapter - 10 EUR


      farm1.staticflickr.com/350/19451326930_949eed9bd7.jpg
      farm1.staticflickr.com/414/19018380773_7a1fea01e8_c.jpg

      • High quality 8pin mini DIN adapter + BNC cable, perfect for PVM or BVM monitors - 30 EUR


      c2.staticflickr.com/6/5694/24041803262_927185d0e4.jpg

      • 8pin mini DIN -> female Scart adapter - 12 EUR (not pictured, but also includes a 2xRCA to 3.5mm jack adapter; 20-30cm long).


      c1.staticflickr.com/1/620/31819959315_af77398ecb.jpg

      • RGB to Composite Video/S-Video adapter. Based on the popular Sony CXA2075 IC - 35 EUR


      c1.staticflickr.com/1/156/31326698420_7aeac7869b.jpg

      • QSound (CPS1.5 Dash) Player 3 and Player 4 harness for the 3P4P adapter (compatible with Warriors of Fate, Cadillacs and Dinosaurs, Saturday Night Slam Masters, Muscle Bomber Duo: Heat Up Warriors) (colours may vary) - 16 EUR




      More pictures:



      Disclaimer, please read before you commit to buy:

      Display Spoiler
      While the best effort was made to make the device as universal as possible, there is no guarantee that it is going to work with every PCB game/TV set/Monitor/Scaler on the market. Quality of displayed audio and video relies mostly on the PCB game itself and may also vary.


      This device is sold "as is", it is tested right before dispatch and guaranteed to work.


      Because of the nature of this device you should know how to properly handle and store it. I will not be held responsible for any damage caused by improper handling and/or use, especially if I suspect the device was mishandled by the user. However, I do service the HAS if it gets damaged (if possible to fix), usually just for the price of new parts, and in some cases for a small fee to cover my time.


      Group orders - when ordering multiple units as a part of a group order, I expect the person who places the order to be the single point of contact for each member of the group order.


      After you receive your HAS unit, make sure you test it as soon as possible.


      Place order only if you understand and accept my rules, and you know how to use the device. Sales are final.



      Shipping and payment:

      PCBs will be placed in anti-static bags, wrapped with bubble wrap and then placed in a cardboard box for maximum protection.
      • USA & Canada:
        • Registered Priority Mail (offered only up to 160 EUR order value. limited online tracking one reaches the US, but you can call or visit USPS to get the latest parcel status; insured) – 5-12 EUR
        • Global Priority Package (tracking, insured) – 20-25 EUR
        • EMS (tracking, insured) - 41-46 EUR
      • Europe:
        • Global Priority Package (tracking, insured) – 17-22 EUR
        • EMS (tracking, insured) - 40-45 EUR

        • Registered Priority Mail (online tracking, but limited in some countries; insured) - 4-12 EUR
      • Other countries - PM me for a quote.
      Payment via paypal, gift or add 4%.

      Cheers,
      RGB

      ==========================================================================================
      Recommended Power Supply Unit for HAS - Home Arcade System - new supergun sets

      The post was edited 27 times, last by RGB: 22/05/2016: New items added, other removed. 22/05/2016: Remodeled the text and contents. 20/07/2016: Updated the information. 15/02/2017: Added HAS V3 information. 13/11/2018: Added HAS V3.2 information. 23/10/2017: Added HAS V3.1 information. 19/03/2018: Updated Saturn controller adapter info. 01/05/2018: Updated availability info. ().

    • Yippikaye wrote:

      Hi,
      I have a Mak Strike V3
      Is your "Sega Saturn to JAMMA joypad converter - 30 EUR" compatible with it ?
      I mean the buttons mapping of course
      Pinout-wise it's compatible, but I don't recommend using it with MAK strike. Undamned performed a number of tests and there seems to be a problem with the MAK strike "design". Basically, the controllers (an maybe even the video out, not tested) get +5V at all times, even if the MAK strike switch is in OFF position. In result, when you turn it ON, the PSU creates a huge voltage spike that can damage stuff.. Here's the full research and explanation - forums.shoryuken.com/discussio…0326678/#Comment_10326678

      The thing though, is that I don't sell these converters separately due to very limited quantity (I've only got a few), they're reserved for HAS buyers. Once I sell all HAS units and I have some Saturn to JAMMA converters left, I can let you know.

      Cheers,
      RGB
    • I want one with 2x Sega and CpS2, please.
      Video: Framemeister XRGB mini with XSync-1 and XCapture-1 │ Sony BVM-D20F1E
      DS: ST-V │CPS2 MultiKit │ CPS3 SuperBios
      MB: MV-1B │ CPS1 │ CPS2 │ CPS3 │ ST-V │ Naomi II │ G-Net │ TTX2
      SB: Street Fighter 1 (6 Button Edition)
      Superguns: MK30 Adcap │ Arcadeforge MAK Strike│ RGB's HAS
      Sticks: Madcatz TE2 │ 2x Capcom CPS │ 2x Neo Geo
    • Undamned converter has been tested and works perfectly with HAS. Regarding the XRGB mini - it all depends on your setup. If you want, you can use a direct 1:1 8pin mini DIN cable. Audio will go via the mini DIN cable as long as nothing is connected to the jack connector on HAS.

      darksofter wrote:

      Awesome supergun! Have you been able to test the undamned PS3/XBOX360 usb converter with your supergun? I have an XRGB mini, how do you connect the sound to it?

      Thanks in advance.
    • I've said it before and I'll say it again, these look like a lovely bit of kit :thumbup:

      I just wish I had use for a supergun. I'm kinda tempted to get one anyway :D

      You mentioned the framemeister, have you had one running though one yet? What are the results like? Do you think it would be ok through a 5m mini-din cable?

      Do the kick-harnesses use a JST XHP-8?
    • FrancoB wrote:

      I've said it before and I'll say it again, these look like a lovely bit of kit :thumbup:

      I just wish I had use for a supergun. I'm kinda tempted to get one anyway :D

      You mentioned the framemeister, have you had one running though one yet? What are the results like? Do you think it would be ok through a 5m mini-din cable?

      Do the kick-harnesses use a JST XHP-8?
      Thank you :)

      The result with the XRGB mini is positive, I mean, it works just fine. Here's Limpan's setup:



      I'm not sure how it's going to work through a 5m long cable, though. One of those Extron RGB devices could be handy if you want to run signals through such long cables.

      The connector is JST XHP-6.