Home Arcade System

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Home Arcade System


      Pre-order here -> homearcadesystem.wordpress.com/pre-order/
      FAQ -> homearcadesystem.wordpress.com/faq/

      Please PM me only in case of technical questions or problems with your HAS. I won't accept orders via PM. Google forms on my website is the only way to buy anything from me.

      You won't receive any confirmation after submitting the pre-order. If the google forms doesn't crash, then it means your pre-order will definitely be in. Please be patient, I'll get back to everyone when the devices are ready for shipping.





      Home Arcade System



      Home Arcade System, HAS for short, is my supergun project. The idea was to have a relatively small PCB-type supergun but packed with some useful features (button layout remapping, autofire, and hassle-free arcade power supply connection).

      Features:

      • JAMMA, JAMMA+ and CHAMMA compatible
      • DB15 controller ports (NeoGeo compatible, extended to support buttons 5 and 6)
      • Programmable button layout
      • Programmable rapid-fire (VSync synchronized, 6 different fire rates)
      • Buttons 1-6 on the JAMMA connector (buttons 4-5 can be disabled)
      • Buttons 4-6 on the “kick harness” connector
      • Internal memory to store the button layout and rapid-fire settings
      • RGB+CSync video output (75 Ohm impedance)
      • Selectable video Low Pass Filter
      • Video brightness regulation via one knob
      • CSync buffer
      • CSync regeneration (fixes video issues in the Taito F3 connected via the XRGB Mini)
      • Selectable CSync level and impedance (~0.35Vp-p, 75 Ohm impedance or ~5Vp-p, high impedance, TTL)
      • HSync and VSync outputs (~5Vp-p, high impedance, TTL)
      • 8pin mini DIN connector for audio and video output (XRGB Mini pinout)
      • 3.5mm jack connector for audio output (it will override the 8pin mini DIN audio output)
      • Audio attenuation
      • JAMMA (mono audio) or MVS (stereo audio) compatible
      • Test and Service buttons
      • Voltmeter (selectable +5V/+12V measurement)
      • 6pin power connector
      • Acrylic glass case
      • Modular build (the basic functionality can be expanded by using special modules)
      Items:
      • HAS V3.2 supergun - [temporarily unavailable] (the set includes a HAS unit; a set of accessories - 2x laser cut 4mm acrylic covers (for top and bottom), a set of screws, and spacers (the "case" comes unassembled); a power supply cable - high quality 45cm long 18AWG cables; 6pin connector on one end, M3.5 fork terminals on the other end that is suitable for arcade power supplies).

      • Sega Saturn to JAMMA joypad converter - [temporarily unavailable]
        • lagless
        • 6 functional buttons + start and coin buttons
        • A built-in coin mechanism emulator.
        • Compatible with official Sega Saturn joypads and arcade sticks (HSS-0104, HSS-0136, HSS-0130). 3rd party controllers/adapters work with limited luck, meaning there are models that work, and some that don't work at all. Analog controllers (including the Sega one; HSS-0137) are not compatible.

      • CPS2 kick harness, 25cm long (colours may vary) - [temporarily unavailable]

      • CPS1 kick harness, 45cm long (colours may vary) - [temporarily unavailable]


      • 3P4P adapter PCB - allows to connect Player 3 and Player 4. The pinout of the 34 pin connector matches the IGS PGM pinout - [temporarily unavailable]


      • CPS2 Player 3 and Player 4 harness for the 3P4P adapter (colours may vary) - [temporarily unavailable]
      • Konami Player 3 and Player 4 harness for the 3P4P adapter (compatible with X-Men, TNMNT I & II, Sunset Riders, Simpsons, Bucky O'Hare, Dark Adventure, Metamorphic Force, G.I. Joe) (colours may vary) - [temporarily unavailable]


      • HD15 adapter PCB. With this adapter you can connect the HAS with the OSSC using a standard VGA cable (it helps with the Taito F3, which won't work with the OSSC when connected via the Scart). You can also use a VGA->BNC cable to connect it directly to PVM/BVM monitors. The adapter comes with a set of spacers - [temporarily unavailable]


      • 8pin mini DIN to HD15 adapter PCB. With this adapter you can connect the HAS with the OSSC using a standard VGA cable (it helps with the Taito F3, which won't work with the OSSC when connected via the Scart). You can also use a VGA->BNC cable to connect it directly to PVM/BVM monitors. This adapter requires an 8pin mini DIN to 8pin mini DIN cable (pins must connect straight through end to end - [temporarily unavailable]


      • PlayStation 2 RGB Scart cable adapter - [temporarily unavailable] [With this adapter you can use the PS2 RGB Scart cable. The adapter allows to select Sync on CSync or Luma, depending on the cable used. PS1 cable can be used as well, but it will require small modification on the HAS PCB (closing 3 jumpers). The adapter comes with a set of spacers]


      • RGB to Composite Video/S-Video adapter. Based on the popular Sony CXA2075 IC - [temporarily unavailable]




      More pictures:

      The post was edited 37 times, last by RGB: 10/07/2018: Availability update. ().

    • Yippikaye wrote:

      Hi,
      I have a Mak Strike V3
      Is your "Sega Saturn to JAMMA joypad converter - 30 EUR" compatible with it ?
      I mean the buttons mapping of course
      Pinout-wise it's compatible, but I don't recommend using it with MAK strike. Undamned performed a number of tests and there seems to be a problem with the MAK strike "design". Basically, the controllers (an maybe even the video out, not tested) get +5V at all times, even if the MAK strike switch is in OFF position. In result, when you turn it ON, the PSU creates a huge voltage spike that can damage stuff.. Here's the full research and explanation - forums.shoryuken.com/discussio…0326678/#Comment_10326678

      The thing though, is that I don't sell these converters separately due to very limited quantity (I've only got a few), they're reserved for HAS buyers. Once I sell all HAS units and I have some Saturn to JAMMA converters left, I can let you know.

      Cheers,
      RGB
    • I want one with 2x Sega and CpS2, please.
      Video: Framemeister XRGB mini with XSync-1 and XCapture-1 │ Sony BVM-D20F1E
      DS: ST-V │CPS2 MultiKit │ CPS3 SuperBios
      MB: MV-1B │ CPS1 │ CPS2 │ CPS3 │ ST-V │ Naomi II │ G-Net │ TTX2
      SB: Street Fighter 1 (6 Button Edition)
      Superguns: MK30 Adcap │ Arcadeforge MAK Strike│ RGB's HAS
      Sticks: Madcatz TE2 │ 2x Capcom CPS │ 2x Neo Geo
    • Undamned converter has been tested and works perfectly with HAS. Regarding the XRGB mini - it all depends on your setup. If you want, you can use a direct 1:1 8pin mini DIN cable. Audio will go via the mini DIN cable as long as nothing is connected to the jack connector on HAS.

      darksofter wrote:

      Awesome supergun! Have you been able to test the undamned PS3/XBOX360 usb converter with your supergun? I have an XRGB mini, how do you connect the sound to it?

      Thanks in advance.
    • I've said it before and I'll say it again, these look like a lovely bit of kit :thumbup:

      I just wish I had use for a supergun. I'm kinda tempted to get one anyway :D

      You mentioned the framemeister, have you had one running though one yet? What are the results like? Do you think it would be ok through a 5m mini-din cable?

      Do the kick-harnesses use a JST XHP-8?
    • FrancoB wrote:

      I've said it before and I'll say it again, these look like a lovely bit of kit :thumbup:

      I just wish I had use for a supergun. I'm kinda tempted to get one anyway :D

      You mentioned the framemeister, have you had one running though one yet? What are the results like? Do you think it would be ok through a 5m mini-din cable?

      Do the kick-harnesses use a JST XHP-8?
      Thank you :)

      The result with the XRGB mini is positive, I mean, it works just fine. Here's Limpan's setup:



      I'm not sure how it's going to work through a 5m long cable, though. One of those Extron RGB devices could be handy if you want to run signals through such long cables.

      The connector is JST XHP-6.