M
megahcker54
Only the -SG ones are designed for work with Initial D games.
The -SGT models are for Thin cards and works on Star Horse 2 and Derby Owners Clubmachines.
The -SGT models can work on some Initial D games, like ID5, ID6 and ID7, but testing of printer will not work properly on the game test menu.
Thermal Head is differnt model and firmware on the board is different on both readers.
Printer test will always fail on -SGT models.
There is one important thing to do first:
The Stocker on the card reader on the -SGT models is adjusted for feed cards of 0.30mm instead of the standard 0.70mm cards.
There is a metal part between the reader and the stocker, with 2 allien screws that can be adjusted in order to let the reader to feed cards from the stocker with a width of 0.70mm.
The gap must be adjusted using a normal 0.70mm card.
The -SGT models are for Thin cards and works on Star Horse 2 and Derby Owners Clubmachines.
The -SGT models can work on some Initial D games, like ID5, ID6 and ID7, but testing of printer will not work properly on the game test menu.
Thermal Head is differnt model and firmware on the board is different on both readers.
Printer test will always fail on -SGT models.
There is one important thing to do first:
The Stocker on the card reader on the -SGT models is adjusted for feed cards of 0.30mm instead of the standard 0.70mm cards.
There is a metal part between the reader and the stocker, with 2 allien screws that can be adjusted in order to let the reader to feed cards from the stocker with a width of 0.70mm.
The gap must be adjusted using a normal 0.70mm card.