What's new
Joined
Oct 8, 2015
Messages
32
Reaction score
2
I have a big blue with a darksoft kit in there, but I had to remake the control panel cause the original one was just destroyed when I purchased it,
I would love to put the super turbo or standard capcom mesh overlay on there but for the life of my cannot find a Hi-Rez or even decent sized one to print out.
Has anyone come across a printable hi-rez version of
http://www.gameongrafix.com/sc_imag...eet Fighter II and New Chal CPO-sca1-1000.jpg
or
http://pre13.deviantart.net/62b2/th...late_cpo_control_overlay_by_fnhot-d6a6qia.png

I have 1 Big Blue and like 4 or 5 Dynamo HS-2 Control Panel's to restore

If anyone has made a Big Blue Darksoft custom CPO and Marquee or equivalent from Dynamo I would be open to that as well.
 
I have NOS of both but don't have a scanner big enough to scan them.
 
I have NOS of both but don't have a scanner big enough to scan them.
I think for the diamond plate design if you just scanned the section with the Capcom logo the rest could be easily patterned out to whatever size you need.
 
my level isn't high enough to do that.
I would think all you would need to do is scan it. the rest can then be done by anyone in the world since the file is then digital and easily transferred.

the diamond plate pattern is simple enough it could be vectorized as well, for "infinite" resolution... again can be done by anyone with a computer once the initial scan is available.
 
I could lend it if you like. I definitely know the diamond plate and SF CPO are NOS. I also have the marvel super hero and the blue, black, and white camo/splatter; but I don't know if they are NOS. The marvel has 3m logo on the back and the other one has a brown backing to it.
 
Back
Top