Arcade Parts/Projects CAD file Repository - Added marquee holders

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Arcade Parts/Projects CAD file Repository - Added marquee holders

      I thought I would start a thread to post some links to some CAD files I've created for various things. If you have anything else you feel belongs here please feel to post and I'll update the top post.

      Hopefully these files will be of use in case you want to get your own panels/parts cut or if you want to design artwork etc. All files are available in DXF/DWG. I can export files to .EPS on request.

      I'll start off by posting some Sega CPs. I've got some Sega Mini CPs/plastics CAD files to post along with all of the marquee holders I used to make.

      SEGA CONTROL PANELS

      I brought my 1L6B and 2L12B panels into work and took all the dimensions for them and I made CAD drawings of all of the layouts possible from each one.

      I've got the following panels uploaded in .DWG and .DXF:





      You can download AutoCAD 2000 versions [here] or AutoCAD 2015 versions [here]

      I can also export them to .EPS if required, just let me know.

      Please note that some hole positions may vary from one manufacturer to another. If you're designing an overlay to fit an existing panel it might be worth doing a test print prior to getting your CPO printed to make sure everything aligns as it should.

      I do know a few panels have been cut from these plans and I've been told and they fit Sega cabs nicely.


      VEWLIX CONTROL PANELS

      Modelled from a E3102171A 2L14B panel kindly donated by Derick2k

      Vewlix_2l14B.dxf


      Standard 2L14B panel for use with E3018350A joystick brackets.


      Vewlix_Mounting_Plate_E3018350A.dxf


      E3018350A joystick brackets for use with E3102171A panels.


      Vewlix_2L14B_V2.dxf


      Identical to the E3102171A but with a stud arrangement to a range of joysticks:



      Seimitsu SE - Fits: LS-32/LS-32-01, LS-34/LS-34-01, LS-40/LS-40-01.
      Seimitsu SE-P40 - Fits: LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60
      Sanwa JLF-P-1 for the JLF

      Mounting studs for the joysticks have increased to take into account the ~7mm spacers you'll need to use to achieve the correct joystick height.


      I've taken as much care as possible to ensure all dimensions are correct and I've printed multiple scaled .dxfs off to confirm accuracy. I'm as confident as I can be without actually getting a panel cut and offering up overlays etc. I would appreciate feedback from anyone who gets one cut so I can update the model if required.

      All Vewlix files are available [here]

      I'll be adding some custom Vewlix control panel .dxfs once I've finished designing them.


      Marquee Holders:

      I've started to draw up and upload some marquee holders. Currently available:

      Astro City / Astro City 2 / New Astro City
      Capcom Cute
      Cyberlead
      Egret 2/3/AWSD
      Naomi - Not 100% accurate, I modelled up my own version a few years back. There is a photo in the directory of a marquee on a cab that was cut from the files.

      Marquee files [here]

      The post was edited 2 times, last by FrancoB ().

    • do you know the actual dimensions on that Virtual On panel?

      I've heard that the layout floating around online is not accurate to the legit panel; though I'm also not sure if the VO OMG and the VO OT panels use the same dimensions.

      I have a VO OT panel that I can confirm against
      Buy 3D Printed Parts: bit-district.com
      Projects: instagram | blog
      Games: VAPS | VOOT | UMK3 | RFM | Vewlix | FiF Jr. | KI2 | E29 | Net City | DDR | Flash Beats
      Wanted | For Sale/Trade
    • defor helped me with the Virtua On panel. He took some overhead photos of his panel for me and I imported them into AutoCAD, scaled them and took the measurements from there. This isn't the most accurate method due to camera angles etc but it's the best I could do without the panel to hand.

      I've noted the dimensions on the picture below. Please do check them against yours.

      I'm not sure exactly which Virtua On panel defor has, I'll see if I can find out in case there are differences between the VO panels.

    • I'm afraid I haven't. I managed to find a sketchup model but the CP doesn't look very accurate.

      Has any one seen or does anyone know of any accurate models out there?

      Failing that, if you wanted to trace one of your panels (ideally on squared or graph paper) you could then scan or send it to me and I can draw it for you.
    • Added:


      VEWLIX CONTROL PANELS


      Modelled from a E3102171A 2L14B panel kindly donated by Derick2k

      Vewlix_2l14B.dxf


      Standard 2L14B panel for use with E3018350A joystick brackets.


      Vewlix_Mounting_Plate_E3018350A.dxf


      E3018350A joystick brackets for use with E3102171A panels.


      Vewlix_2L14B_V2.dxf


      Identical to the E3102171A but with a stud arrangement to a range of joysticks:




      Seimitsu SE - Fits: LS-32/LS-32-01, LS-34/LS-34-01, LS-40/LS-40-01.
      Seimitsu SE-P40 - Fits: LS-55/LS-55-01, LS-56/LS-56-01, LS-58/LS-58-01 and LS-60
      Sanwa JLF-P-1 for the JLF


      Mounting studs for the joysticks have increased to take into account the ~7mm spacers you'll need to use to achieve the correct joystick height.



      I've taken as much care as possible to ensure all dimensions are correct and I've printed multiple scaled .dxfs off to confirm accuracy. I'm as confident as I can be without actually getting a panel cut and offering up overlays etc. I would appreciate feedback from anyone who gets one cut so I can update the model if required.

      All Vewlix files are available [here]

      I'll be adding some custom Vewlix control panel .dxfs once I've finished designing them.
    • Awesome Work Franko B,

      Just wanted to thank you.

      I've been makin new panels for My Naomi & Net city cabinets, but these have been done by hand with an anglegrinder.
      Hopefully i can get a friend of mine to lasercut from these drawings instead.

      So once again, HUGE thanks for sharing :D
    • hursit wrote:

      thank you very much. It is great source.
      And if is it possible to share with us for the Egret 2 Control Panel if you have it ?

      Thanks again
      Sorry, I don't have files for the E2 CP.


      Added to the OP:

      Marquee Holders:

      I've started to draw up and upload some marquee holders. Currently available:

      Capcom Cute
      Cyberlead
      E2 - Suitable for Egret 2/3/AWSD
      NAC - Suitable for Astro City / Astro City 2 / New Astro City
      Naomi - Not 100% accurate, I modelled up my own version a few years back. There is a photo in the directory of a marquee on a cab that was cut from the files.

      Marquee files [here]