yes I just use 1xfemale->2xmale splitter cableLOAD "*",8,1
I use the 6A version.. oversized since I power two PSU simultaneously (i could probably power three or four, but oh well)
Cabs: Vewlix FC, GC 3, ID7, DinoKing, Swing, MiniCute, NAC
Superguns: Jasen's MK30ADCAP│RGB's HAS
Displays: PVM 2950Q│Pioneer PDP-V402E│LG B6 65" Oled
Wanted Cabs: Egret 29, Egret II, AWSD, Stern Star Trek Pinball
Wanted Part: SFII Dynamo HS5 "Cut Corner" CP, Egret 29 Complete CP top (blue or red)
mmm... I posted the link before
under "wattage" you select your plug (Euro in your case)
under "color" you select the amperage (12V 6A in my case)
I know.. it's a bit confusing (welcome to China)
You gotta show your setup, I want to eventually do the same thing, power most retro consoles from 1 psu.
I want to show my game cave once everything is clean and tidy (i'm getting there slowly...)
I also use a single 9V PSU to power 5 diferent retro-consoles (using a 1 in 5 splitter and a combination of polarity inverter cables)LOAD "*",8,1
Pascal meant a link for the splitter rather than the PSU
ahh ok I bought the splitter at ebay, but something like this should work:
"The DreamPSU will need a switching power supply with a 2.5mm inner diameter and 5.5mm outer diameter jack (5.5×2.5mm)."
oops I will check my adapter when I arrive home next week, I dont know exactly what splitter I'm using..
@edit: I mixed up my 9v splitter with the 12v one, you are right the 9v splitter has 2.1 diameter and the DreamPSU should have 2.5
@edit2: that's the one i bought for the DreamPSU: ebay.de/itm/1x-DC-5-5x2-5mm-1-…-37M-Copper-/291973107929LOAD "*",8,1
The post was edited 3 times, last by deibit ().
Thanks @deibit and @Sp33dFr34k
I was looking for the splitter
Edit: looks like the splitter on ebay is not available anymore, oh well, now I know how they call them and I can search for another seller
Edit2: looks like the same seller reposted them here:
The post was edited 2 times, last by PascalP ().