Taiko HW picture dump

[nem]

@defor, @rewrite

System 256 with PSU and JVS IO in cage underneath:



Cage top removed, front and back:

JVS IO, top and bottom:

Filter board, front and back:



SIF PCB between drums and JVS IO:



SIF PCB, top and bottom:

 

[rewrite]

You're literally my hero. Thank you so much. Going to see if I can order these directly from Namco.

 

[rewrite]

Apparently Namco needs 6-digit part numbers in order to make orders (not the white sticker numbers or the PCB numbers). So that's no good.


@defor do you have the manual for the 2x6 Taiko games? Any chance there're part numbers for the parts list? I only have the older System10 manual, and it DEFINITELY doesn't have part numbers.

Though the SIF board does not look very complicated at all.

 

[rewrite]

For the record, all of these parts are NLA from Namco.

 

[defor]

@defor do you have the manual for the 2x6 Taiko games? Any chance there're part numbers for the parts list? I only have the older System10 manual, and it DEFINITELY doesn't have part numbers.

I have almost all the taiko manuals- I'll check this weekend- if you don't hear back by Monday- remind me, I have a habit of disappearing sometimes.

 

[rewrite]

@defor do you have the manual for the 2x6 Taiko games? Any chance there're part numbers for the parts list? I only have the older System10 manual, and it DEFINITELY doesn't have part numbers.

I have almost all the taiko manuals- I'll check this weekend- if you don't hear back by Monday- remind me, I have a habit of disappearing sometimes.

Thanks!

I have the manual for 13, with no parts numbers.

 

[Darksoft]

nice pictures!

 

[dash3296]

@deforDo you have the manual for Taiko no Tatsujin 10?