I just picked up a SFEX2 ZN2 off eBay, shown working but arrived non-working. I don't get a picture or sound, I've tried booting with dipswitch 2 on it and nothing shows up. I've reseated the rom board, cleaned the jamma edge, tried two different jamma setups etc.
Are these boards super picky with voltage? I'm hoping it's just pebkac and not an actual motherboard problem.
e: Got a blue screen when putting pressure on the CPU, reflowed the CPU and it's all good now.
Are these boards super picky with voltage? I'm hoping it's just pebkac and not an actual motherboard problem.
e: Got a blue screen when putting pressure on the CPU, reflowed the CPU and it's all good now.
Last edited: