synbiosfan
Enthusiast
There used by the elite mobsters as a form of payment.
- Thread starter Darksoft
- Start date
Should be plenty members in Europe who can do it for you if you don't mind shippingI am in the same situation. I have all the goodies for STV (LCD and reset wire) cps2 (key writing).If someone close to Luxembourg has time and good soldering skills, let me know.Since my soldering skills suck (imo), I've bought some of Mitsurugi-w's STV goodies and had him do the installs/updates.
CPS2 too.
No complaints about anything...even got some Walsdawg Arcade tokens!
Otherwise I will contact @Mitsurugi-w
What do you need? Just the 4 wires of the key writing + firmware?
For cps2, I already have the wire. I just need the soldering part (and firmware upgrade, but this part is just putting a file on the SD card if I'm right)Should be plenty members in Europe who can do it for you if you don't mind shippingI am in the same situation. I have all the goodies for STV (LCD and reset wire) cps2 (key writing).If someone close to Luxembourg has time and good soldering skills, let me know.Otherwise I will contact @Mitsurugi-wSince my soldering skills suck (imo), I've bought some of Mitsurugi-w's STV goodies and had him do the installs/updates.
CPS2 too.
No complaints about anything...even got some Walsdawg Arcade tokens!
What do you need? Just the 4 wires of the key writing + firmware?
For STV, I have the reset wire, the LCD stuff, but again the soldering part is over my skills
bagheera369
Champion
In that case, I ought to be able to buy cave boards with em. Namco/Aladdin's castle/Flynns arcade/Showbiz/ChuckE/Discovery Zone/Cinemark/Pixel Dreams (NVGM)/and a large smattering of places only the respective locals would have heard of....something like 6000 tokens sitting here.....but no Walsdawg....may have to remedy that.
ShootTheCore
Legendary
I walk into the front door of my local arcade. The bouncers are waiting for me just inside the door. "You're not a regular," one of them says. "Scram!" I slowly, calmly lift up my right hand, clenched in a fist, and dramtically open it, revealing a Walsdawg Arcade token. The look of menace on the thug's face immediately changes to fear. "I...I'm sorry sir. I meant no disrespect. Just gotta keep out the riff-raff ya' know?" He smilies pleadingly, hopefully...the urge to flee obvious in his eyes. I slowly lower my hand, keeping it palm up with the token showing, and nod once-decisively. The thug's companion quickly escorts me to the closest candy cab running R-Type and pulls the satin-covered stool out for me.
The CPS2 wires are very easy to do with some basic soldering skillsFor cps2, I already have the wire. I just need the soldering part (and firmware upgrade, but this part is just putting a file on the SD card if I'm right)For STV, I have the reset wire, the LCD stuff, but again the soldering part is over my skillsShould be plenty members in Europe who can do it for you if you don't mind shippingI am in the same situation. I have all the goodies for STV (LCD and reset wire) cps2 (key writing).If someone close to Luxembourg has time and good soldering skills, let me know.Otherwise I will contact @Mitsurugi-wSince my soldering skills suck (imo), I've bought some of Mitsurugi-w's STV goodies and had him do the installs/updates.
CPS2 too.
No complaints about anything...even got some Walsdawg Arcade tokens!
Don't have a ST-V myself, but if you could link me to the instructions I could have a look on what's needed for that.
(if you don't mind shipping back and forth to the Netherlands that is )
Better send me a PM as we are derailing the NeoGeo thread quite a bit
bagheera369
Champion
See...I thought the bouncer was gonna laugh at you, and say "We only take yen here kid...."
Fantastic Films, especially the first one. you should make it a point to watch it.
Brentradio
Champion
OK, I have to interrupt this thread to say that if you have not seen John Wick then do so ASAP.
You are welcome.
Back to the regular scheduled programming...
Here's my interpretation of the movie in emoji's.
(sorry, there is/was no emoji for 'head blown off'...)
Just see it already.
You are welcome.
Back to the regular scheduled programming...
Here's my interpretation of the movie in emoji's.
(sorry, there is/was no emoji for 'head blown off'...)
Just see it already.
Last edited:
SNK-NEO-GEO
Enlightened
The first movie was O.K.. the second movie was Funtastcs. I watched it twice at the theater..if you don't already have MoviePass, get it, it is like $89 for a year subscription, you can go to the theater and watch a movie per day for free.. it is a fantastic deal
synbiosfan
Enthusiast
I enjoyed the first but not really the second.
Mobiusstriptech
Enthusiast
The first batch hasn't even shipped out yet. Just wait. It will come in the future. It's not to be rude, but there is no reason to worry about when another batch will be available when the first batch isn't even shipping.
Brentradio
Champion
Hey Darksoft,
Can you please post when the 3rd, 4th, 5th, 6th, 7th, 8th, 9th, and 10th batches will be for sale?
(as a side note, I'm not making fun of anyone's questions, I'm making a joke about how many batches I think will be made...)
Can you please post when the 3rd, 4th, 5th, 6th, 7th, 8th, 9th, and 10th batches will be for sale?
(as a side note, I'm not making fun of anyone's questions, I'm making a joke about how many batches I think will be made...)
E
Euphoria
hi Hey Darksoft,
Could someone tell me the statistics of how many cartridges have been made thus far?
Just want to know how many are out there and how many previous versions of the step to the multi exist.
Please?
Also does someone have a pic of the above mentioned walsdog tokens?
Regards
Euphoria
hi :Can you please post when the 3rd, 4th, 5th, 6th, 7th, 8th, 9th, and 10th batches will be for sale?
(as a side note, I'm not making fun of anyone's questions, I'm making a joke about how many batches I think will be made...)
Could someone tell me the statistics of how many cartridges have been made thus far?
Just want to know how many are out there and how many previous versions of the step to the multi exist.
Please?
Also does someone have a pic of the above mentioned walsdog tokens?
Regards
Euphoria
Last edited:
Mobiusstriptech
Enthusiast
That's pretty easy. It's 0. Yes zero. None of the final revision carts are in the wild.hi Hey Darksoft,
hi :Can you please post when the 3rd, 4th, 5th, 6th, 7th, 8th, 9th, and 10th batches will be for sale?
(as a side note, I'm not making fun of anyone's questions, I'm making a joke about how many batches I think will be made...)
Could someone tell me the statistics of how many cartridges have been made thus far?
Just want fly to know how many are out there and how many previous versions of the step to the multi exist.
Please?
Regards
Euphoria
