No dice. Stuck on a white screen, which shakes for a second right after boot-up, and then stays the same.OK guys, I did a quick conversion of neocps1 hack. I didnt have time to test it with the multi. Can someone confirm that it works?
Thanks!
http://www.mediafire.com/file/xpmhe8k84mac1w9/sf2ce_cp2+-+v5+neocps1.7z
The NeoCPS1 version is working for you ok on the multi?Thanks Neocps1 and mikejmoffitt for your release
For Neocps1 release, if you want to change the region open rom 03.
Go to 00000190
00 Japan
02 USA
04 ETC
So funny to play this on Cp-2 yeah
So you have burned all the chips and placed them on a B-board and it works? So it should work fine on the multi as well. Maybe it was converted wrong to multi format.I have converted it on a B-board.
It works fine for me, but I converted it to the CPS2 multi format myself.The NeoCPS1 version is working for you ok on the multi?Thanks Neocps1 and mikejmoffitt for your release
For Neocps1 release, if you want to change the region open rom 03.
Go to 00000190
00 Japan
02 USA
04 ETC
So funny to play this on Cp-2 yeah
It can be played on a regular B board, I just haven't distributed the files that way. Try this hot mess, I haven't tested it and don't plan on it:Can the hyper fighting port be burned to roms and played on legit hardware or is multi board the only way?
I must give credit to Trap15 for some help with the bg/sprite priority calculation as well as EEPROM reference code.Mikejmoffitt Sf2HF region :
Go to 00040440 on rom 03
00 Japan
02 USA
04 ETC
Your conversion is very good. Zangief stage have no priority problem !!. You've done an very good job
Re-thanks for your work ... and hope you have another cps1 project...
Custom marquee is the cherry on top. Love the "Malenko" Capcom homage.^ Dedicated Multi-CPS2 in a Dynamo cab is absolutely fantastic!