Any PGM Conversion info out there?

[Apocalypse]

@SEGV you're correct! I will fix that.

 

[lydz]

Espgaluda Ketsui

igs pcb no-0179-2

https://item.taobao.com/item.htm?spm=a1z10.3-c.w4002-5269720139.35.29dd136962c3oC&id=583009475359

 

[xodaraP]

Interesting that the protection chips are removed

 

[Apocalypse]

Interesting that the protection chips are removed

@Darksoft and I had the discussion about a potential multi before and we both came to the same conclusion: all games can be run unencrypted.

 

[twistedsymphony]

i thought some games used the ASIC for additional processing outside of protection?

 

[twistedsymphony]

Espgaluda Ketsui

igs pcb no-0179-2

Thank you for confirmation of Killing Blade Conversion.

do you have any pictures of the converted IGS PCB NO-0178?

 

[oneleaf86]

Espgaluda Ketsui

igs pcb no-0179-2

https://item.taobao.com/item.htm?spm=a1z10.3-c.w4002-5269720139.35.29dd136962c3oC&id=583009475359

Hey Lydz. I understand that you come here to advertise your bootlegs and multis but it sure would help out a lot of folks here if you were to share your methods of converting Killing Blade.
You're obviously not obligated to do so but we like to share here at AP .

 

[xodaraP]

Interesting note about that picture. Not only is the security ASIC removed, so is the PAL that would normally be modified....

 

[lydz]

pcb -333 334

 

[xodaraP]

Hmm, he hasn't modified the PALs there either.

I'm glad I picked up the Killing Blade cart so I can do the Espgaluda conversion, but what witchcraft is this that @lydz has achieved

My Ketsui conversion on KoV2 doesn't even work

 

[nnap]

I have also not had any luck yet with the KoV2 cart. The KoV2 - Nine Dragons work fine. I tried to trace the PIC on the working and non working boards but I have not been able to find a pattern there.

 

[twistedsymphony]

To do a DDP DOJ conversion you need :

I just wanted to post up a thank you for this great guide.

I followed your post for converting my KOVSH (PCB-0490) into DDP DOJ BL and it works great. This really is the best PCB for this conversion since it uses 3.3V for the ROMs already and has level shifters. so there's no lifted pins, voltage converters, wiring, or hot glue necessary... just swap the chips for a clean install.

 

[PascalP]

Interesting that the protection chips are removed

@Darksoft and I had the discussion about a potential multi before and we both came to the same conclusion: all games can be run unencrypted.

So where can I pre order this

 

[Darksoft]

we're working on it...

 

[suverman]

we're working on it...

ooooooooooooooooooffffffffffffffff

 

[gusmoney]

we're working on it...

Interest check? I am in for one!

 

[xodaraP]

we're working on it...

 

[BanishingFlatsAC]

Im in for one as well.

 

[twistedsymphony]

please lets not make this an interest thread, create a new thread if you want to do that.

 

[PascalP]

please lets not make this an interest thread, create a new thread if you want to do that.

Done

PGM multicart interest check