What's new

Blinky

Beginner
Joined
Aug 23, 2017
Messages
1
Reaction score
0
I have a yellow lindy with JVS but no wiring. I bought a standard 60 pin cable off ebay and hacked it, but not all of the females on the cable seem to make contact with the pins since some buttons do not register. Is there a specific non-standard ribbon for use on the JVS? If so, where does one acquire such a cable?
 
I just use regular 60-pin ribbon cable between the I/O and my S-JIHP and it works fine for all buttons.
 
Back
Top