What's new

Dreygor

Grand Master
Joined
Dec 18, 2016
Messages
993
Reaction score
729
Location
Midway, GA USA
I was wondering if anyone had the specific specs or a manual for this particular Sega sound amplifier. It works very well, I just am not happy with the speakers and I was looking into my options. I specifically need to know the power output and at what ohm load.

It's model SJ25-0361-01 and looks like this...

IMG_20180201_221936329.jpg


Thanks
-Drey
 
So that tells me it will at least two speakers at 4ohms and 10 watts each (one per channel) i wonder how it would do with two speakers on each channel. Would it be better to wire them in series or parallel? Thats why i was wondering the actual power and ohm load availability on the amp. If i remember correctly i can run 4ohm speakers in parallel and im safe with a 4ohm output .. but if i wire them in series it would need to have an output of 8ohm per channel.

Can anyone confirm this?
 
I think the sub out is just a line level pre-out, so any active sub should do
 
no interference between non shielded speakers and the monitor ?

I have tried some pioneer it creates convergence problems near the magnets
 
Sorry late to the party here does anyone possibly have a schematic for this sega sound amp
 
I have a buzzing sound on one of my new net city cabs. I unplugged the speakers and I am reading 24v output on one and zero on the other. What is normal output per line?
 
Back
Top