Kaneko PX4460/LPF6K reproduction by Caius

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • invzim wrote:

      A trick you may consider for future projects is to put rounded corners on the PCB - that way the PCB house more often than not route out the boards instead of using v-scoring to give you smooth edges.
      Some of my projects have rounded corners but having smooth ones is not an issue to me.Then adding rounded corners requires more time and effort during designing.I'm mainly aimed to functionality.

      The post was edited 1 time, last by caius ().

    • caius wrote:

      invzim wrote:

      A trick you may consider for future projects is to put rounded corners on the PCB - that way the PCB house more often than not route out the boards instead of using v-scoring to give you smooth edges.
      Some of my projects have rounded corners but having smooth ones is not an issue to me.Then adding rounded corners requires more time and effort during designing.I mainly aimed to functionality.
      Of course there's always room for improvement but we should consider ourselves very lucky those kinds of reproductions even exist.
      Those projects are really time consuming, I totally understand first goal is functionality over anything else.
      Looking for:
      - OutRun boardset
      - Desert Breaker romboard (Sega S18)



      01010011 01000101 01000011 01010010 01000101 01010100 00100000 01001101 01000101 01001110 01010101 00100000 01000111 01010101 01011001
    • Apocalypse wrote:

      Of course there's always room for improvement but we should consider ourselves very lucky those kinds of reproductions even exist.Those projects are really time consuming, I totally understand first goal is functionality over anything else.
      Yes, I think it's a good thing to have as much possible custom parts reproduced (and not because I'm making them...) since donor original parts will end sooner or later (maybe this will be a problem for future enthusisast generations...).
      I have some other repros done that I will test in the next days and other projects floating in my (disturbed...) mind :D