Hi guys,
back after my health concerns.
I test the kit in France.
so that's what was done.
test with a functional kit.
Test your Darksoft on my boards (video)
Changed the wiring used and redo the welds
Cable Gpal without lifting the leg
Raised the GPal's leg
Tested without the 4 wires just reset
Reformatted your Microsd and tested with both releases (old and new)
Make X and X contact test
All crossed in all possible combinations eg Gpal + old, Gpal paw lifted + old, Gpal + New Etc Etc On my config, on yours, with the 8go card with the 4go card, with my 4go card.
https://drive.google.com/drive/folders/ ... alOCC3sx01
the links of the video..