What's new
The RGB PCB with impedance matching signals is installed (files are public - OSHPARK.com or AISLER.net): :)

Neo-Geo-MVS-RGB-PCB.jpg



The picture looks great!

112339-Windjammers-png
 
Last edited:
Sorry to ask this Question, I am a complete noob.

Trying to colonize a MV1fZ, if I order the boards as listed/mentioned above, do I have to get the other electronic parts ?

I am more interested in the " RGB PCB" as my Ali-express consolized MV1C is dead. I think its their shitty parts have have died... the board itself (MV1C) works.


I have soldering skills, I can easily solder the stuff. Just curious.
 
Hi,

yes of course, if you want to consilze a MVS you need some more parts:

- SCART jack oder DIN jack to connect the MVS the your TV
- jack for the Power supply
- power switch to turn the MVS on/off
- D-SUB 15 jacks to connect controllers to your MVS
- jamma connector (you could connect the cables directly to the Jamma Pins but using a connector would be a "cleaner" way)
- momentary push button for entering the test mode
- 180 ohms resistor to lower the 5V line at the output

- for the MV-1FZ(S) the stereo pcb will be ok but for a MV-1C another solution for an amped stereo signal ist needed (using an IC etc)

BTW: you can find plenty of information at the internet (here for example)
 
Back
Top