XtraSmiley
Legendary
Hey guys, I'm starting to get the parts together so I can join the DS Multi-Club! (waiting for restock!!!!) But after looking around at some of the awesome builds, I decided to check out the install directions. I noticed that you have to cut a post from the case and the board is quite large with high standing pins. I wonder now that it has been a few years, DS do you plan on refining the board to make it smaller or more compact while also negating the need to cut the post?
If you haven't thought about it before, what do you think now?
And as always, Mahalo for making this!
EDIT: Since so many people are fixated on the part about removing the post, I thought I'd expand some reasons from what others have said below. Things like updated pin header, connection between boards, faster loading times, cheaper cost, etc. There is ALWAYS a reason to look at new and improved revisions. Maybe the time and cost don't make it worth it right now, but it's not a "never" thing.
If you haven't thought about it before, what do you think now?
And as always, Mahalo for making this!
EDIT: Since so many people are fixated on the part about removing the post, I thought I'd expand some reasons from what others have said below. Things like updated pin header, connection between boards, faster loading times, cheaper cost, etc. There is ALWAYS a reason to look at new and improved revisions. Maybe the time and cost don't make it worth it right now, but it's not a "never" thing.
Last edited: