ricardo_om
Beginner
Perfect ! .. thank you again !! ..
Do you have any more information on this? I've never heard of this nor seen this mentioned in any of the Type II IR manuals.Not sure if this will help or not but there is also a small adapter board that the daisy chained leds plug into to complete the circuit.
If you dont have that you can wind up torching a lot of those sense boards.
So, could you please help me clarifying this information about the position? ..according to the HOTD2 manual the arrangement is like this with 1 being the closest to the Gun sense board:
| 5 | 6 | 7 | 8 | 9 |
[ monitor ]
| 4 | 3 | 2 | 1 | 10|
the front.The information above is seen from the back or the front ?
Hello,Not sure if this will help or not but there is also a small adapter board that the daisy chained leds plug into to complete the circuit.
If you dont have that you can wind up torching a lot of those sense boards.
I didnt have one and I tried to plug them in without it and they burned out several of the optic sensors. Big mistake trying to plug them in without that.