Arcade game
Enthusiast
Awesome man, thank you for that.Actually i’ll ready have the file for 1p panel
Just have to look for it again,but for sure i have it
And soon i will make the 2p control panel overlay
My brother is a graphic designer
So he could make it for sure just like he did with first one 1p
And definitely will share it on arcade otaku for people to use if they want to
Scott from GoG was willing to print off another one even though he checked his files and process and could not find where the “error” occurred. He even verified the source file was a bit over 25” as ReplicaX mentioned earlier to account for over-bleed. Turns out my ruler was off! To be sure, before he went off to print another, I actually checked with 5 different rulers. Surprisingly, the two rulers that I have that measure in 16th increments, showed that the length was a tad shy of 25”. However the other 3 rulers that measured in 1/8ths showed the length to be spot on at 25”. So error on my end with the tools I used to measure. Kudos to Scott at GoG for the excellent service and support after the sale. Now we just need to get him that Super Street Fighter 2 overlay to him so he can print those off as well.That’s odd I wonder what could have gone wrong. No worries I’m sure they’ll make things right for you.I didn’t apply the CPO yet. I currently have the Capcom diamond plate CPO on my panel that I got from GoG years ago.
I am in talks with Scott from GoG. I remeasured the length and it was 24-13/16; not quite 25” but I was more concerned about the height. My Q25 didn’t come with an original CPO so I didn’t have a reference. So if you’re saying that the original never wrapped around the bottom curve then it seems the CPO I received is pretty close to the measurements.
Its setup as a cage and rack mounted using the same style rose connectors as the CP. Should be 4 screws on the back of the PSU where your AC plug is just like a PC PSU and the unit slides out the rear.How do you remove the psu from these?
Glad to hear, Scott is a good guy and will to work with ppl.Scott from GoG was willing to print off another one even though he checked his files and process and could not find where the “error” occurred. He even verified the source file was a bit over 25” as ReplicaX mentioned earlier to account for over-bleed. Turns out my ruler was off! To be sure, before he went off to print another, I actually checked with 5 different rulers. Surprisingly, the two rulers that I have that measure in 16th increments, showed that the length was a tad shy of 25”. However the other 3 rulers that measured in 1/8ths showed the length to be spot on at 25”. So error on my end with the tools I used to measure. Kudos to Scott at GoG for the excellent service and support after the sale. Now we just need to get him that Super Street Fighter 2 overlay to him so he can print those off as well.
I do not believe so.So is it already scanned and available somewhere?