Hey guys, i'm interested in making my own cps2 kick harness.
I've seen people use various connectors (molex, hirose), was wondering if anyone had any advice on what the best/easiest option is?
If I go the Hirose route I understand I'd need parts 'DF1B-34DS-2.5RC'( the connector) + 43030-0001 (pins), is that correct?
Thanks
I've seen people use various connectors (molex, hirose), was wondering if anyone had any advice on what the best/easiest option is?
If I go the Hirose route I understand I'd need parts 'DF1B-34DS-2.5RC'( the connector) + 43030-0001 (pins), is that correct?
Thanks