Cps2 kickharness dndtod problem

[8bitforlife]

ok I have a blast with a cps2 kick to blast io
Every game work except dndtod my 4 5 6 are going to 3rd player

 

[PascalP]

well yes, that is because DND is a 3 player game.
Button 4 for both P1 and P2 are on the Jamma edge

 

[8bitforlife]

is there a way to make a kick for it that would work with blast io?

 

[PascalP]

Jamma connector



3/4p connector

 

[KalessinDB]

well yes, that is because DND is a 3 player game.
Button 4 for both P1 and P2 are on the Jamma edge

4 player, actually.

That reminds me, I gotta make sure my big blue has button 4 wired on the jamma edge...

 

[PascalP]

is there a way to make a kick for it that would work with blast io?

If you just want a plug and play solution you could get a JNX Atlas which wires the CPS2 kick connector to button 4/5/6 on the Jamma edge (b6 is only used for Pandora's box etc, usually it is ground)
I find this very handy for Atomiswave as well which has 5 buttons on the Jamma edge

JNX Atlas Adapter for your Pandora's Box/Blue Elf/Game Elf etc.

 

[8bitforlife]

he's making me one for my bubble bobble with negatron on it. So I should be good then?

 

[PascalP]

yes you should, just connect your kick connector to the Atlas and you have button 4 on the Jamma edge