Bubble bobble PC030CM problem

[8bitforlife]

I know caius made 1 but is there a reproduction I can buy?


Bought bubble bobble off Klov and it never fully worked kept getting I/o errors off and on went to plug it into my blast city for first time because I got an atlus with negatron and this happened.

 

[8bitforlife]

Caius got back to he's going to make me one. Problem solved. Just a waiting game now.

 

[XtraSmiley]

why wouldn't you just put that one back on?

 

[8bitforlife]

why wouldn't you just put that one back on?

going to try first but when it was connected I was getting I/o errors intermittently. So ether a pin wasn't connecting or just starting to crack somewhere. So I'm going to try reconnecting it till I can bulletproof it.

 

[Mitsurugi-w]

I've fixed that by laying it flat on the underside of the pcb and soldering all the leads to the bottom of the pins. Can be a quick temporary fix until you get the replacement.

 

[8bitforlife]

in at work but my soldering station was here I fixed a snowglob for boss never took it home. I'm very been at soldering but I gave it a shot its attached now but ill try the underneath trick if what I did fails. At least I confirmed my atlus worked popped in a Double Dragon sound was fine.

 

[8bitforlife]