What's new

archimage

Happy
Grand Master
Joined
Feb 14, 2017
Messages
838
Reaction score
644
Location
France
Hello,

I am looking to build CN->DB>UD-USB adapters to add fightsticks for 3p and 4p for these systems, if possible already crimped connectors on the CN side because there are lots of screw terminal DB connectors out there :

- CPS 1/2
- Konami (Tmnt - Simpsons - Sunset...)
- Midway Nba Jam and Nba hangtime
- Sega System 16 - STV

I would like to know where to source these specific connectors and their pinouts.

I know the UD-USB needs also +5v pin so I need to be very careful with the pinouts and names of each connector to avoid frying something while supplying power to the adapter.

Help would be appreciated !

Thanks
 
Last edited:
Many of these are listed on Arcade Otaku or similar wikis. I would recommend to start there.

I think it's a good idea though to do the dsub connectors. I did one for my Data East Hoops 96 MLC out of 2 DB15s and a SCSI cable that adds 3p and 4p ports for neo sticks.
 
- CPS 1/2
- Konami (Tmnt - Simpsons - Sunset...)
- Midway Nba Jam and Nba hangtime
- Sega System 16 - STV
CPS1, Konami and ST-V are all JST-NH family connectors
Midway uses single row IDC connectors, which is also compatible with Molex KK series
CPS2 uses a 34 pin Hirose connector
and I have no idea about System 16 because I've read lots of conflicting information, I think different games use different connectors

if you want pinouts just find a PDF manual for one of the games.
 
Back
Top