What's new

VVCollectiv

Beginner
Joined
May 4, 2018
Messages
11
Reaction score
3
Location
Bellflower
Purchased an Atomiswave motherboard along with King of Fighters Neo Wave.

I have plugged them into my Astro City cab through the jamma connector.

Motherboard and game start up perfectly fine, my issue really is with playing the game (movement).

I get responses from top 3 buttons during game play only but no movement from the joysticks at all.

(I am aware that it has a 5 button layout and have visited the settings in AW to try and play with buttons configuration but ultimately still no movement from joysticks).

Any assistance would be greatly appreciated.
 
That's very odd. Have you tested the board using another cabinet or a supergun?

The pinout for controller input is the same as any other Jamma board. Perhaps you're missing ground somewhere?
 
That's very odd. Have you tested the board using another cabinet or a supergun?

The pinout for controller input is the same as any other Jamma board. Perhaps you're missing ground somewhere?
I thought i was odd as well, considering everything goes through the jamma connector. I have not tested it on either another cabinet or super gun as I unfortunately don't have others to try it on. I will see what I can do to test on another cab or super gun. Thanks
 
sometimes the diodes in the lines near the jamma go bad and don't let the signal pass.
 
Back
Top