What's new

chacal231077

Grand Master
Joined
Dec 21, 2017
Messages
674
Reaction score
226
Location
France
Hello
I would like to convert my Version 3.0 to Revision 4.0 ^^



What are the Eprom to burn :?:


Thanks you ;)
 
Last edited:
ok thanks you :) ;) :thumbup:

Just one last question
what is the model of eprom to reprogram not to touch the original version ?
 
Last edited:
Ok Thanks You

Is this the last revision of the Y-Unit that can be installed? ?( :?:
 
Ok Thanks You

Is this the last revision of the Y-Unit that can be installed? ?( :?:
No ... this is what @Mitsu said in another place ... "I'm pretty sure 4.0 was the same on T-unit and Y-unit. I think 5.0 was mostly an update tweaking the way the game ran on the T-unit" ... hope it helps you ^^
 
ok Thanks But the other version turbo version 3.0 ,3.1 & Ninja it is necessary to the Little PCB?


dsc00023.jpg
 
You have a modified/hacked board there with Turbo Ninja (unofficial hack like the "Rainbow Edition" was for Street Fighter 2). The first thing to do is dump those 2 roms in the pic and post them here so we can check if they are in mame, that could be an undumped revision. Then after that if you want rev 4 you would keep that daughter card and rom removed and then you would program 2 other roms with the rev 4 from mame.

Do not reprogram those roms pictured, you would be throwing money away, that kit has a value, you can sell it on ebay in 10 seconds.
 
  • Like
Reactions: nem
Back
Top