JVS I/O error

[chacal231077]

@chacal231077
Cyberlead will NOT display specifice game stuff on the LED panel with 2x6, just System 12

Trust me, I tried, I have both the v1 (red only) and v2 (color) LED and I/O’s

 

[nem]

Has anyone tried Toukon Retsuden 4 Arcade Edition on the Naomi?

It's one of the few games that support the memory card readers on the CL2. Surely it displays something on the LED marquee as well?

See here:

https://www.bandainamcoent.co.jp/corporate/press/namco/2000/feb/press-03.html
https://flyers.arcade-museum.com/?page=flyer&db=videodb&id=3702&image=2

 

[twistedsymphony]

@PascalP and @xodaraP

Yaton has a few variants of these PCBs and I'm trying to figure out which versions do what.

Any chance you can confirm the Model number and revision sticker for your IO board, LED board and LED panel?

8699014200 (8699011104) [CL1 I/OB]- Cyberlead JVS IO V1.02 (Red Only)
8699014200 (8699011104) [CL1 I/OC]- Cyberlead JVS IO V???
8699014200 (8699011104) [CL1 I/OD]- Cyberlead JVS IO V???
8903960302 (8903960302) [CLS1 AMI-B]- Cyberlead JVS IO V3.0

8699014500 (8699011104) [CL1 LEDA] - Cyberlead LED PCB

RX1-696A - Cyberlead Dot Matrix Display (Red Only)
RX1-696B - Cyberlead Dot Matrix Display (???)

 

[PascalP]

From memory I can tell my JVS IO v1 board has the B suffix and the v2 the D

The LED panel itself has red colored LED’s for the red only V1 and white LED’s for the multi-color v2

 

[twistedsymphony]

ok so the "CS1 O/ID" is multi color?

 

[PascalP]

Yup, also the v2 allows me to boot later revision System 12 stuf and 2x6 where the v1 does not.

Also the v2 boots standalone without LED attached where the v1 doesn’t boot at all without LED attached

 

[xodaraP]

I just ordered one of these from Yaton and I was going to ask if he had different versions so I could try and get the same as what I have. Sounds like he might do.

Mine has the CLS1 AMI-B sticker on it and that same number. I have a multi colour DMD but I can't remember the number on the LED controller itself

Edit: I went back through the thread where I discussed it with PascalP and it is the same as his.

I think the latest game I played on it was Soul Calibur and I had full colour on the DMD with that

Edit: I'm very interested to know what the AMI sticker means.

 

[xodaraP]

Has anyone tried Toukon Retsuden 4 Arcade Edition on the Naomi?

It's one of the few games that support the memory card readers on the CL2. Surely it displays something on the LED marquee as well?

See here:

https://www.bandainamcoent.co.jp/corporate/press/namco/2000/feb/press-03.html
https://flyers.arcade-museum.com/?page=flyer&db=videodb&id=3702&image=2

Bit of a revival but I have the NAOMI in my CL at the moment. Don't have the CL2 but I'm still trying to determine if my IO board is the standard from a CL2. I'll boot this game and try it