Rush 2049 CRT issue

[Picklebacon]

My rush 2049 machine's CRT started jumping/shaking recently. I noticed that if you adjusted the RGB levels it would affect the amount of jumping but now it jumps no matter what. I post a video link to my issue. Any ideas?

 

[Picklebacon]

Anyone?

 

[nem]

Is it a Wells Gardner U3000? That's what was in my 2049 cab.

With any WG monitor I would suggest a cap kit. I've fixed 4 out of 6 faulty WG monitors just by putting new caps in. Put low ESR caps in the power supply board and swap the 68k 2W resistor for a new one (it's a matter of time before it fails).

 

[Picklebacon]

Its actually a Samsung unit. If I get the model number, is there a resource online that I could find a capacitor kit? Thanks

 

[xodaraP]

Samsung is the tube, the chassis is the large PCB connected to the neckboard on the tube with all the controls on it

 

[nem]

Mine had a RCA tube on it. Could be a different monitor or just tube swapped. Take a pic.

 

[Picklebacon]

Sorry for the late response. I retrofitted a 27 inch Samsung CRT to get me by. The board is a Kortek. Where would I be able to locate a cap kit?

 

[meybarra]

Arcade Parts & Repair:

https://www.arcadepartsandrepair.co...kt-3414-series-monitor-cap-kit-105c-nichicon/