What's new

TMF68k

Enthusiast
Joined
Dec 21, 2018
Messages
121
Reaction score
138
Location
JAPAN
A power failure occurred while updating the firmware. The menu does not start. Can I initialize it? Please help me.
 
Hi tmf, if you put again the menu files and firmware properly you should be able to update it well

Mr BIG
 
I tried with some boards but it is impossible.
It does not start. Is it an initial malfunction? I bought two.Another cartridge is okay.
</s></s></s></s></s></s></s></s>
 

Attachments

  • DSC_2364-1346x2393.JPG
    DSC_2364-1346x2393.JPG
    492.1 KB · Views: 227
  • DSC_2365-1346x2393.JPG
    DSC_2365-1346x2393.JPG
    323.8 KB · Views: 235
  • DSC_2367-1346x2393.JPG
    DSC_2367-1346x2393.JPG
    474.3 KB · Views: 232
Try with another SD card, put the firmware in the update folder and the menu files too

Mr BIG
 
Give up. Where can I get the repair?
 

Attachments

  • DSC_2378-2393x1346.JPG
    DSC_2378-2393x1346.JPG
    461.3 KB · Views: 235
  • DSC_2379-2393x1346.JPG
    DSC_2379-2393x1346.JPG
    703.7 KB · Views: 232
  • DSC_2380-1346x2393.JPG
    DSC_2380-1346x2393.JPG
    494.3 KB · Views: 235
  • DSC_2382-1346x2393.JPG
    DSC_2382-1346x2393.JPG
    405.9 KB · Views: 231
Let it sit at cross hatch screen for a lil while it should switch to a different screen also swapp out to a good and card those you pictured are not great make sure you format ti fat32
 
Last edited:
I worked hard, but this cartridge does not work.
Another cartridge has no problem.
 

Attachments

  • DSC_2387-1346x2393.JPG
    DSC_2387-1346x2393.JPG
    362.3 KB · Views: 236
  • DSC_2388-1346x2393.JPG
    DSC_2388-1346x2393.JPG
    636.8 KB · Views: 246
  • DSC_2389-1346x2393.JPG
    DSC_2389-1346x2393.JPG
    570 KB · Views: 242
  • DSC_2390-1346x2393.JPG
    DSC_2390-1346x2393.JPG
    722.5 KB · Views: 264
I worked hard, but this cartridge does not work.
Another cartridge has no problem.
so you got one of the cartridges to fully work and the other one doesn’t work at all swap the Sd card of the one working
 
Last edited:
I went on a long repair trip.
The returned repair works perfectly.
Thank you.
Thank you for your advice.
I didn't think I could meet @Darksoft in Spain.thanks
 

Attachments

  • DSC_0531-1346x2393.JPG
    DSC_0531-1346x2393.JPG
    753.7 KB · Views: 193
Back
Top