What's new
The kick harness side of things needs consideration too. I dislike the idea of breaking jamma standard by utilising the end ground pin as button 6 so need to work out how to handle this.
I wouldn't worry about this as long as there's a way to control this. In many real arcade cabinets the last pair of ground pins serves as GND output, it basically goes to buttons only.
 
Last edited:
The kick harness side of things needs consideration too. I dislike the idea of breaking jamma standard by utilising the end ground pin as button 6 so need to work out how to handle this.
Little dipswitches?
 
it could be good but I have any idea how to. From extender it's easier and preserv pcb.
 
Back
Top