I used the search function but I was unable to find a clear answer. How is amplified audio mono and stereo, fed of the Jamma edge?
General all agree that pin 10 is mono but for stereo is is L or pin 11 or both depending on the boards?
Also what is the proper attenuation circuit for the audio. I saw some simple things like a 10k resistor in series with a 1k voltage divider and more complex thinks like 880ohm in series to a 47uf cap and 20k on the output.
I am pretty new to this stuff so any help is appreciated.
General all agree that pin 10 is mono but for stereo is is L or pin 11 or both depending on the boards?
Also what is the proper attenuation circuit for the audio. I saw some simple things like a 10k resistor in series with a 1k voltage divider and more complex thinks like 880ohm in series to a 47uf cap and 20k on the output.
I am pretty new to this stuff so any help is appreciated.