Pinned A Freeware Taito TypeX2 Multigame.

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • JoeAwesome wrote:

      As I was reading more about the Phoenix BIOS, there were posts about moving the jumpers or pulling the battery to reset the password. The former seemed fine, but removing the battery did not as there isn’t a dongle with this game. I was apprehensive to do that option. Still, I thank Niko for his advice to pull the jumper. I feel really delicate with this to make sure it’s not made into a paperweight.
      Nice progress, do you have a picture of the jumper you changed ?

      edit: what region is that Chase Hq 2 ?
      The future of ST-V rests upon our work and your work
    • rtw wrote:

      Nice progress, do you have a picture of the jumper you changed ?
      edit: what region is that Chase Hq 2 ?
      imgur.com/gallery/lVXqbHQ

      Region is US, posted in the link, too :)

      The jumpers were the set of three next to the battery, with it originally set on the furthest two. I moved the jumper to the opposite end, covering the last two, and powering on. Then I removed the jumper altogether for the next power up.