CPS2 I/O Interface

[RGB]

@RGB it's fine that it's delayed (last we heard was June...), but would really appreciate a new ETA. It's useful for my budgeting.

The first batch is ready as we speak and I will start selling it soon, it's just that there are some personal matters I need to take care of first, and this takes time :/

 

[KinG_SoPa]

No rush @RGB life matters come first.

I been preorder hopefully im on this first bath

 

[RGB]

Thank you. I really wish I could just move on and sell those (along with the first HAS batch, which has been waiting for some time now). The plan was to start selling everything by the end of June or early July, because that's when I finished the assembly, but my health had other plans for me.

 

[KinG_SoPa]

:/ Life is never fair but keep fighting, I hope you feel better!!

 

[SF3BMX]

@RGB I emailed you not long ago and had a gut feeling something was going on with life. No rush! Hope you feel better man!

 

[plasia]

@RGB it's fine that it's delayed (last we heard was June...), but would really appreciate a new ETA. It's useful for my budgeting.

The first batch is ready as we speak and I will start selling it soon, it's just that there are some personal matters I need to take care of first, and this takes time :/

Thankyou for the update RGB, hope things straighten out soon.

Speaking of soon... can't wait to get that email!

 

[YesAffinity]

Anybody got a good link to a 56-pin edge connector with pins instead of solder eyelets?

Or suggestions on interfacing the IO with the CPS2 jamma connector?

 

[RGB]

@RGB it's fine that it's delayed (last we heard was June...), but would really appreciate a new ETA. It's useful for my budgeting.

The first batch is ready as we speak and I will start selling it soon, it's just that there are some personal matters I need to take care of first, and this takes time :/

Thankyou for the update RGB, hope things straighten out soon.
Speaking of soon... can't wait to get that email!

Please check your mailbox

 

[plasia]

 

[KinG_SoPa]

Hello, does anyone have pictures of installing the HDMI mod on their cps3?

 

[yuro]

This is the closest you're gonna get here @KingSopz:

https://github.com/marqs85/cps2_digiav/blob/cps3/pcb/doc/install.md

I'm looking to do this mod next. Would love a clean way to secure the board on to a surface (plexi like Jasen's kit, or metal like TRFightstick's).

 

[KinG_SoPa]

This is the closest you're gonna get here @KingSopz:

https://github.com/marqs85/cps2_digiav/blob/cps3/pcb/doc/install.md

I'm looking to do this mod next. Would love a clean way to secure the board on to a surface (plexi like Jasen's kit, or metal like TRFightstick's).

Thanks for the link!, and i have a metal case from TRFightstick (the best). Ill have to figure out whats the best way to place it. Ill share pics

 

[Epyc]

Hope things work out for you @RGB. Life likes throw curve balls every so often.

With that said, I'm interested in an I/O interface once you pick things up again.

 

[KinG_SoPa]

Hello everyone,

Me and @jassin000 (mostly jassin) tried to install the hdmi digiav yesterday but got no video, the tv switched to the hdmi port it was connected to so we know it’s getting power, im not sure if i missed something, honestly i went by @RGB photos and some other online photos. If someone can help that would be great :/

 

[RGB]

You forgot about something

Also, I suggest thicker wire gauge for power (at least 24AWG).

 

[KinG_SoPa]

Thanks @RGB, will replace the power wires and will put the headers on the digiav but im confused as to what im suppose to do with those 2 chips you pointed on the left side

 

[RGB]

Third and fourth picture in the official installation manual - https://github.com/marqs85/cps2_digiav/blob/master/pcb/doc/install.md

Hard to tell from your pictures, but I see that SMD jumpers J3, J5 and J6 on the top side of CPS2 Digital AV PCB aren't bridged (and they should be).

 

[KinG_SoPa]

Wow thanks RGB I feel like an idiot lol

Last question those this 2.1v digiav come pre flashed?

 

[RGB]

Hey, no worries, I hope you get this up and running!

Did you buy it from VGP? If so, it's definitely pre-flashed.

 

[KinG_SoPa]

Hey, no worries, I hope you get this up and running!

Did you buy it from VGP? If so, it's definitely pre-flashed.

yea I bought it from VGP, i was thinking do something like this with wires connected each end to not move the digiav and desolder all that