What's new

xodaraP

Legendary
Joined
Sep 21, 2016
Messages
4,750
Reaction score
3,793
Location
Gold Coast, Australia
Hi guys,
I'm looking at a RODA for a friend and it has the dreaded IC16 error. I can only find 1 record of this error being fixed which was fixed by replacing the RAM, with many other people saying that they did that with no effect.

Before I go ahead and replace/socket that RAM (because it's a nightmare to remove from these boards) - has anyone successfully repaired this error in the past and knows what might be causing it if not the RAM?
 
I removed the RAM and it was in fact bad. But I installed a socket and replaced it, with no effect. I've also reflowed the custom that connects to the /RESET on the Z80
 
Back
Top