Hackcell
Grand Master
I was checking +5VDC continuity to install a CPU fan on my KI2 board. At some point I touched a ground spot and with the 5V was returning a value (same ground + -5V), instead of nothing (0L) as if I do that with my CPS1 board.
Is it normal that I get a measure by checking continuity between ground and +5V/-5V?
Ground + 12V does not return any value (which I think is the way it should be).
Thanks.
Is it normal that I get a measure by checking continuity between ground and +5V/-5V?
Ground + 12V does not return any value (which I think is the way it should be).
Thanks.