C connor Enthusiast Joined Apr 13, 2018 Messages 125 Reaction score 40 Location arkansas Mar 6, 2019 #1 Got a 34" tube for my ITG2 cabinet which appears to have had the CRT power cable modified for use with an LCD. Any ideas what connector I need to get this power cable plugged back into the CRT chassis?
Got a 34" tube for my ITG2 cabinet which appears to have had the CRT power cable modified for use with an LCD. Any ideas what connector I need to get this power cable plugged back into the CRT chassis?
C connor Enthusiast Joined Apr 13, 2018 Messages 125 Reaction score 40 Location arkansas Mar 8, 2019 #2 Connector I need is the OP-2 found here: https://www.greatplainselectronics....WUdyRrKTFO7wYVzg2kFRLRr2urItLTYDh6GZTsU9ABJpk
Connector I need is the OP-2 found here: https://www.greatplainselectronics....WUdyRrKTFO7wYVzg2kFRLRr2urItLTYDh6GZTsU9ABJpk
Mitsurugi-w Arcade Admini-Moderator Staff member Immortal Joined Jun 12, 2015 Messages 7,780 Reaction score 9,732 Location New Bern, NC USA Mar 8, 2019 #3 I have an entire case of the 6 pin version. You could cut it down to 2 with a dremel.
C connor Enthusiast Joined Apr 13, 2018 Messages 125 Reaction score 40 Location arkansas Mar 9, 2019 #4 Mitsurugi-w said: I have an entire case of the 6 pin version. You could cut it down to 2 with a dremel. Click to expand... I already ordered the connectors, waiting for them to arrive.
Mitsurugi-w said: I have an entire case of the 6 pin version. You could cut it down to 2 with a dremel. Click to expand... I already ordered the connectors, waiting for them to arrive.