Every time I've made the swap, everything happened well... The problem is that the menu freezes during use and this makes it difficult to test with better efficacyThe goal of that r1081 firmware is to check if the slot writing of 3 games simultaneously works well now.
That's weird. Are you condifend that the update went well? What does it say the About section of the menu?Hello everyone, I am using 20190829_r1075.zip firmware and menu_20190713.7ze, I tried the recommandation of Darksoft: I used FW2.5.10_r1081.zip by replacing flash.img from r1075 with r1081 renamed flash.img. This time I can change the games one by one on one slot, I couldn't before. I tried on slot 1 or 2 without any problem. But still If I add 3 games on the 3 slot, I can install it the first time but then I still could nt remove and change the 3 game in once, a back screen appeared and I had the re start the console. I had the remove first 2 games of the 3 then exit, it works, I had one game remain that I can remove and add a new one.
Hi,:New version of Menu and Firmware released! Check the usual place for FW releases for AES: Darksoft's MultiAES. Latest Firmware, Menu and Instructions
That FW_Pack had the wrong CPLD file. I just updated it. Please download again and let us know how it works. Thanks!
this thing that you mention is probably due to the fact that you just updated the firmware. Change the settings in the menu after doing a FW update and it should work properly. Please confirm.The last mini "bug" for me at the moment it's if I skip intro, the boot timer is always 0s (it's very little bug I don't skip and all it's ok )
I tried the new update, the image have the same problems above, i go back 20190829_r1075 firmwareI made the last update however the image sizzles again as on these images.When I go back with the firmware 20181127_r989_AES I have no sound( z80 error un menu configuration)