What's new

doozer

Unobtanium
Professional
Joined
Jan 12, 2018
Messages
219
Reaction score
126
Location
Brisbane, Australia
Hi All,

I've got many ATX PC power supplies that I've tried using with my Lindbergh Yellow. Out of them, only one or two will cause the Lindbergh to power on when the switch is thrown on the PSU itself.
All the others, nothing happens - as if they are waiting for the power button on the PC to be pushed.

Does anyone know what needs to be done to make a regular ATX PSU auto power on when connected to the mains? Or perhaps where a push buttons needs to be added to wake the PSU?

Interestingly, if I connect the ATX plug to the Lindbergh with the PSU live, it always powers on immediately. I can't imagine this is good for the health of the Lindbergh though.

Thanks,
Matt.
 
yes connect the green wire (ps_on) to ground (any of teh black wires)

ATX-Power-Supply-Pinout.jpg
 
Back
Top