- Thread starter Escarioth
- Start date
XtraSmiley
Legendary
Man I love your cases, but storing them is going to be a pain!
Well... For storing and display i love them
Attachments
J
jassin000
Yea I only have the one, but because the JAMMA edge is recessed inside of the case and the other edge flat its stands up very well on its own.
Then you have all that great artwork/shelf candy to look at, just like a giant video game cart.
XtraSmiley
Legendary
They look amazing! But will need more shelf space....
ok for the heat.
after a 5 hours straight test case is slightly warm to the touch.
it always a bit warmsince its packing a bit of heat in there, but like always aluminum dispatch heat nicely.
Just to be sure maybe ill put holes hidden under the logo (won't be seen) like .100" dia.
TMNT is a pricey pcb and i wanna be sure it breath correctly
ill keep that no holes version for myself...i never plays more then 1-2 hours so its fine.
Everyone ordering one will have that new updated version
Logo plate will also have a minor update since sticker is a bit too large to fit on.
but besides that i think everything is good to go :3
what more to say then....Pre-orders open ?
I'll keep them open until march 15. I need to reach at least a minimum of around 8 cases at least to proceed.
If by march 15 it is not reached i'll have to extend the pre-order time or cancel
i wont ask anyone money until then
so anyone who have contacted me until now ill ask again just to be sure tomorrow...or you can just write it back again starting now
you can order any of my previous cases and i will also try to make a special TMNT gift to go along for THIS order only (unless i end up with extras for next batch)
I still have a few CPS-1 logo aluminum art for the first who order one
(not sure think i still have 3)
thanks and i hope this will be as much fun as the first batch was
if you have any questions ---> ask !
after a 5 hours straight test case is slightly warm to the touch.
it always a bit warmsince its packing a bit of heat in there, but like always aluminum dispatch heat nicely.
Just to be sure maybe ill put holes hidden under the logo (won't be seen) like .100" dia.
TMNT is a pricey pcb and i wanna be sure it breath correctly
ill keep that no holes version for myself...i never plays more then 1-2 hours so its fine.
Everyone ordering one will have that new updated version
Logo plate will also have a minor update since sticker is a bit too large to fit on.
but besides that i think everything is good to go :3
what more to say then....Pre-orders open ?
I'll keep them open until march 15. I need to reach at least a minimum of around 8 cases at least to proceed.
If by march 15 it is not reached i'll have to extend the pre-order time or cancel
i wont ask anyone money until then
so anyone who have contacted me until now ill ask again just to be sure tomorrow...or you can just write it back again starting now
you can order any of my previous cases and i will also try to make a special TMNT gift to go along for THIS order only (unless i end up with extras for next batch)
I still have a few CPS-1 logo aluminum art for the first who order one
(not sure think i still have 3)
thanks and i hope this will be as much fun as the first batch was
if you have any questions ---> ask !
Last edited:
KalessinDB
Grand Master
Writing it back again:
I'm in for 1 TMNT case.
I'm in for 1 TMNT case.
Same here!
Just a last minute information.
I was told that we're making some change here with paint stuff.
i have to be sure that everything is made before april.
Pre-order date will only last until march 1st. (it was previously march 15
)
I was told that we're making some change here with paint stuff.
i have to be sure that everything is made before april.
Pre-order date will only last until march 1st. (it was previously march 15
)
ShootTheCore
Legendary
In for one
for those ordering up, i'll tag a small thing i made for fun.
It's free~ and might not be included on other pre-orders
i try to make something new each time
but i'll end up with a few extras just in case and give them up to other TMNT or konami cases in the future until im out.
and natural aluminum (no paint)
Its on experimental process and i wont have a second try at this so i hope everything will be good.
It should be able to stand on its own this time with help from 2 small legs
not like that CPS1 logo the previous cps1 buyers got
It's free~ and might not be included on other pre-orders
i try to make something new each time
but i'll end up with a few extras just in case and give them up to other TMNT or konami cases in the future until im out.
and natural aluminum (no paint)
Its on experimental process and i wont have a second try at this so i hope everything will be good.
It should be able to stand on its own this time with help from 2 small legs
not like that CPS1 logo the previous cps1 buyers got
Attachments
So just to be sure as a last call.
pre-orders should be closed starting march 2nd on monday.
ill still have a bit of time ahead of that but when the schedule is started, i won't be able to add more cases to the list.
If everything goes well, it shouldn't take more then a month to make/deliver everything.
If i ran a bit late on time i'll contact you guys , no worries.
Small changes
-TMNT-
---------
-Small holes to be added on top case, just for help with air flow stuck inside.
-Konami vynil to be included free but i won't put it on the case, you can decide to put it where you want.
-Double Dragon II-
----------------------
-Case will gain extra .125" height.. i think my first version was a bit too compact. It should have enough space now.
pre-orders should be closed starting march 2nd on monday.
ill still have a bit of time ahead of that but when the schedule is started, i won't be able to add more cases to the list.
If everything goes well, it shouldn't take more then a month to make/deliver everything.
If i ran a bit late on time i'll contact you guys , no worries.
Small changes
-TMNT-
---------
-Small holes to be added on top case, just for help with air flow stuck inside.
-Konami vynil to be included free but i won't put it on the case, you can decide to put it where you want.
-Double Dragon II-
----------------------
-Case will gain extra .125" height.. i think my first version was a bit too compact. It should have enough space now.
Last edited:
ShootTheCore
Legendary
Sounds good - I'm excited!
Everyone paid very fast !
a big thank you to you all
now it's time to work some magic.
I went back at work and will be finishing everything up tonight
all order should be put on queue for the during weeks to come.
I'll update everytime i get some update
if you have questions or anything feel free to ask... i'm pretty lonely here in the office *_*
a big thank you to you all
now it's time to work some magic.
I went back at work and will be finishing everything up tonight
all order should be put on queue for the during weeks to come.
I'll update everytime i get some update
if you have questions or anything feel free to ask... i'm pretty lonely here in the office *_*
