Nanoa MS9-29A image rolling

[mR_CaESaR]

Hey guys,

My ms8 had a vertical collapse the other day (will send to Jomac)

I'm replacing my ms8 with an MS9 which I had the MS9 monitor working 100% when I was doing some testing for my racing cab..

Even got it working to 24khz

Now for the love of God... I can't get a proper image on the monitor when I put a Pandora/jpac or raspberryjamma on my astro city.

It's like I need a VHOLD but I cannot find a VHOLD pot.

Anybody have suggestions?

 

[mR_CaESaR]

Video of image rolling..

On a Pandora's box..

https://youtu.be/qjtjjv1vZH8

On a RaspberryJamma

https://youtu.be/I_3X_9cfgdE

Sent from my SM-N950F using Tapatalk

 

[nem]

Unfortunately, there's no way to adjust vertical hold on the MS9.

 

[brad808]

There really isn't a need for v-hold on ms9. It will auto sync and lock on provided you give it the right signal. The manual States it can sync from 55hz-65hz (so pretty much all your arcade boards). In real world testing I can inject sync signals as low as around 48hz and as high as 77hz before losing sync.