Hi all,
I have a 6 in 1 Jamma switcher with MK1, MK2, and NBA Jam all successfully installed. I recently bought a Bad Dudes board from a reputable source, citing it as “working.” The board is in fantastic cosmetic condition, and after a close review doesn’t have any burnt traces or components that I can see.
When I insert the board and fire it up, no picture, no sound, just some weird occasional noises.
It makes me wonder if there is something about my set-up that needs adjusted. I’m not an expert at this stuff yet. Any assistance would be greatly appreciated.
Steve
I have a 6 in 1 Jamma switcher with MK1, MK2, and NBA Jam all successfully installed. I recently bought a Bad Dudes board from a reputable source, citing it as “working.” The board is in fantastic cosmetic condition, and after a close review doesn’t have any burnt traces or components that I can see.
When I insert the board and fire it up, no picture, no sound, just some weird occasional noises.
It makes me wonder if there is something about my set-up that needs adjusted. I’m not an expert at this stuff yet. Any assistance would be greatly appreciated.
Steve
Last edited: