What's new

westie1871uk

Beginner
Joined
Mar 17, 2016
Messages
1
Reaction score
0
Hi Everyone,
hope you are well and thanks for taking the time to look at my post, I am looking to make my own arcade table top with a Pandora's box, however I cannot find any step by step instructions with everything I would require to do this does anyone have any tips or anything they can share with me to build this ive always had a keen interest in arcade machines

thanks for your time
 
Welcome to the forum!

It shouldn't be too too bad. I know there are table-top plans all about the net. You may want to take a look on the BYOAC forums because outside of the size of the cabinet, you're just looking at building a JAMMA cab, so not too hard. Something worth mentioning is that Pandora's Box, like many other multigames, doesn't use a standard JAMMA pinout, so you're going to want to triple-check what it is before you wire everything up to JAMMA standard. I'm not at all much of a woodworker, so I don't know how to guide you there, but I'm sure there are plenty here who can help!
 
Back
Top