Initial D 27" LCD install

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Initial D 27" LCD install

      Took out my original monitor and installed a Wells-Gardner 27" LCD. Here are some fotos I took on putting it back together. I had to do a little modifications on the LCD mounts. I cutted the lips and slotted a 8/32 hole across so I could have room to move the LCD left to right or vise-versa when I install the window bracket and speaker grills. I also have to move the speakers a couple inches back because the LCD mounts where covering there holes.
      Images
      • FB_IMG_1558058771976.jpg

        27.17 kB, 720×405, viewed 91 times
      • FB_IMG_1558846001509.jpg

        21.21 kB, 720×405, viewed 62 times
      • FB_IMG_1558846011669.jpg

        45.03 kB, 540×960, viewed 71 times
      • FB_IMG_1558846022691.jpg

        19.32 kB, 720×405, viewed 43 times
      • FB_IMG_1558845927411.jpg

        19.53 kB, 720×405, viewed 69 times
      • FB_IMG_1558845936057.jpg

        26.24 kB, 720×405, viewed 60 times
      • FB_IMG_1558845952508.jpg

        44.96 kB, 540×960, viewed 66 times
      • FB_IMG_1558845972745.jpg

        20.9 kB, 720×405, viewed 63 times
      • FB_IMG_1558845989124.jpg

        33.09 kB, 540×960, viewed 60 times
      • FB_IMG_1558845995745.jpg

        32.58 kB, 540×960, viewed 40 times
    • More fotos
      Images
      • FB_IMG_1558846031849.jpg

        44.09 kB, 540×960, viewed 49 times
      • FB_IMG_1558846046199.jpg

        18.04 kB, 720×405, viewed 42 times
      • FB_IMG_1558846058455.jpg

        18.78 kB, 720×405, viewed 45 times
      • FB_IMG_1558846065040.jpg

        31.11 kB, 540×960, viewed 41 times
      • FB_IMG_1558846071519.jpg

        18.43 kB, 540×960, viewed 43 times