What's new

Lojack44

Student
Joined
Feb 23, 2018
Messages
20
Reaction score
0
Location
Arizona
I bought one of the TR Fightstick CPS 2 cases for my Darksoft kit, which required a larger 80mm fan compared to the original one. The oem fan had a red and black wire running to the board, and the replacement has red, black and white wires. How does the new one wire to the board?
 
hi, the noctua fan i used had red, black and yellow. i had to connect red and black, the yellow one is for the fan speed. look where red and black from the old fan were connected and connect tred and black from the new fan accordingly, you probably don't even need to change the connector.
 
Last edited:
Back
Top