Guys, I got to thinking...
If I plug my control panel (joystick and buttons) into the Fast IO and then using the JAMMA edge to plug into a Jammafier (to convert JAMMA > JVS), and then connect to the JVSPAC2 to allow me to control things on a PC.
This is really just for inputs. Sound and Video would be direct connections from the PC to the amp and monitor.
The goal is not mess with the original Vewlix wiring and try and use these bits and bobs to be able to use FAST IO for TTX2/TTX3 and then quickly adapt to PC use, by jest selecting a different input on the monitor.
I have not powered this up. Wanted to ask you guys first.
1. I would power this up via the P1 cable on FAST IO. Power should flow to and power up the Jammafier. Right way to do that? P1 gives; +12V, +12V, GND, GND.
2. Which kick harness to get to go from the K91X1204A "B" connector to the HAS kick harness on the Jammafier? Is this even a kick harness?!
3. Would this even work? Brain says yes, it should.
Thank you @invzim for all your toys you create!
Multis: CPS2, CPS3, Niko's TTX2
Boards: SF2HF CPS1 w/ Stereo Mod, KI1+2, TTX3
Superguns: HAS, Jammafier
For Sale: RetroElectronik ProGun, Windy City ATP-300
The post was edited 3 times, last by yuro ().