Hi Monstermug,
The board I purchased had the pins bent/shifted, this was many years ago, was missing the (I think) clock crystal, and not working. I got it to work by bending the pins back with a dental pick and accidentally applied too much force on one or two of them. I had to use a dremel to cut through the metal top layer praying that I could solder to the chip and pads. Miraculously, it worked, but it is unstable sometimes restarting randomly. Anyway, the pins are very very tiny and I don't know if I could successfully use the quik chip to get it off without lifting any pads.
If you ever want to part with one of the chips... please pm me. Thanks!